脉冲调制光热辐射测量的分层模型与计算

给出了脉冲调制光热辐射中温度场分布的数值模拟结果，建立了分层介质的三维热扩散模分析了层深度、大小等信息与温度场的关系，并将计算结果同扫描式测量的实际测量结果相比较，两者符合良好。     

精益研发VS精益生产

雨疏风骤之后,是海棠依旧,还是绿肥红瘦?词人李清照关心风雨之后的海棠时问了这个问题。当关注信息化时代的精益策略时,我不禁也想问这个问题。丰田生产模式1990年被美国麻省理工学院的教授总结为精益生     

Excel在真空计量中的应用

在真空计量领域中，Ｅｘｃｅｌ电子表格软件得到了广泛的应用。本文举例说明了Ｅｘｃｅｌ的数据计算，统计分析，回归分析，宏、ＯＬＥ和ＤＤＥ功能。     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

双星TDOA/FDOA定位系统的目标定位精度分析

根据双星时差/频差(TDOA/FDOA)的定位原理,推导了目标定位精度模型,分析了目标定位精度与轨道高度、星间基线长度、TDOA测量精度、FDOA测量精度、卫星速度测量精度、卫星位置测量精度等误差源之间的关系。分析结果表明:测量因素中的FDOA测量精度和卫星速度测量精度,是影响双星定位的关键因素;而TDOA测量精度和卫星位置测量精度,对目标定位精度的影响较小。     

基于装配约束的飞机导管几何特征建模与误差补偿

针对飞机导管实际装配过程中因装配应力大导致故障频发的问题,提出了一种基于导管装配特征的误差补偿方法.首先采用几何建模法进行了导管装配过程的几何建模,并提出了一种基于轴线矢量的导管装配模型建模方法.在此基础上,采用罗德里格旋转公式建立了基于实际装配工况下的导管空间位姿计算模型.然后基于导管装配要求进行了装配约束分析并识别...     

一种高超声速滑翔飞行器轨迹智能预测方法

针对高超声速滑翔飞行器(Hypersonic glide vehicle, HGV)机动性强、轨迹预测困难的问题,选取气动加速度作为预测参数,提出了一种基于集合经验模态分解和注意力长短时记忆网络的HGV轨迹智能预测方法。首先,以HGV六自由度运动方程为基础,分析了其机动特性和气动力变化规律,建立了动力学跟踪模型,对气动加速度进行实时估计;其次,利用集合经验模态分解对估计的气动加速度进行分解和重构,减弱噪声影响,避免对预测模型的干扰;最后,利用去噪后的气动加速度数据对注意力长短时记忆网络进行训练,进而预测未来气动加速度数据并重构HGV未来轨迹,实现轨迹的在线预测。实验仿真表明,该方法能有效预测HGV机动轨迹,预测精度高、稳定性好。     

A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

不同湍流模型对插板式进气畸变的数值模拟

为得出一种较为准确的湍流模型,应用三种湍流模型对插板式进气畸变进行数值模拟,通过与畸变实验实测数据的对比,研究不同湍流模型在插板式进气畸变计算中的预测能力。不同湍流模型计算出的出口流场畸变不同,重整化群k-ε模型得出高压区范围较大,S-A模型过渡区域范围大。结果表明:插板高度为畸变发生器内径的48%时,低压区范围角与实验值较为吻合,插板高度为畸变发生器内径的20%时,低压区范围角偏小。畸变指数的计算值以可实现化k-ε模型最为准确。